Archive

Archive for the ‘Basketball Sets & Eq. – Indoor’ Category

Jun
30

Fitness Equipment
 

Community Centre Fitness Equipment, Wexford.

 
Very recently we have completed a sports & fitness installtion for Astro Active Community Centre, Enniscorthy, Co. Wexford. We supplied numerous fitness equipment pieces for the fitness suite,  fitted main wall basketball units which allows matches to be played to National League standard and also line marked the sports hall with 6 courts.
 

Astro Active Background.

 
Astro Active is a community based multi-sports facility for use by those with disabilities and members of the community. The Sports Field Development Programme was launched in 1998 with the levelling, draining and reseeding of the field adjacent to our premises. This was further expanded in 2003 due to the purchase of an adjacent premises which was to be used as an indoor sports complex. The aim of the project was to provide a multi-sports facility for use by members of the community and those with disabilities in the South East.

AstroActiveFitnesseq2 AstroActiveBasketballAstroActiveFitnesseq

 

Contact Fitness Functions.

If you require Sports Hall Basketball Goals, Linemarking or Fitness Equipment information or pricing please do not hesitate to contact us, email our marketing manager; niall@fitnessfunctions.ie, visit or website www.fitnessfunctions.ie or low call us on 1890-252-856. We look forward to hearing from you.

, , , ,

Apr
10

Celing Mounted Basketball Units

Ceiling Basketball & Wall Mounted Main Basketball Goals.

As part of our series of in depth focus on Dept of Education sports equipment products, in this blog post we are looking at indoor Basketball Units.

Basketball Match Goals PE/30.

A standard new school’s PE hall will be equipped with the list of equipment in the 406 or 594 Department of Education packages. The most substantial item on the list is the PE30 Ceiling Mounted Basketball Goal.

Ceiling Mounted Basketball Unit (Department of Education Specification)

 

Electrically Operated with Brake Cable Safety Device. To European Standard EN 1270 Electric motor complete with Enclosed Limit Switches at both extremities of travel. Structural steelwork in roof (provided by PE Equipment Supplier)

Framework and Playing Positions.

Usually 80 mm x 40 mm box section or equal approved but if span is greater than 5m a composite beam made from 2 No. 40 mm x 40 mm rails separated by 200 mm to 300 mm is required for adequate rigidity (or equal approved by the design team).
When the structure is in the playing positions, the horizontal and vertical movements shall be in accordance with the FIBA regulations. Hanging steel frames made from 40 mm x 40 mm x 2 mm box section, a single arm 100 mm round tube, telescopic tubing or equal approved. If the drop length is greater than 4 m, a composite beam is required as above. The requirement to comply with I.S. EN 1270 will determine the design criteria and in particular in relation to the horizontal and vertical movement of the frame when Basketball Goals,subjected to the playing loads. This steelwork can be installed after the handing over of the building to the client as long as access to the roof girders is not made impossible by gable walls or false ceilings or other structure or fitting. In particular, the positioning of radiant panels must be carefully selected to suit the Basketball Goal design. This work should be co-ordinated between the Design Team, the Main Contractor and PE Equipment Supplier. The PE Supplier should consult the roof drawings before submitting tenders.

Backboard

Backboard: 1800 mm x 1050 mm made from 12 mm Perspex. Must include a backing frame to transfer the load from the ring back through the board to prevent the Perspex cracking. Must include a spring loaded ring, breakaway load at 105 kg I.S. EN 1270 Standard, which allows the ring to deflect approximately 30 degrees and return to normal when the load is removed.
Safety padding, screw on type, to be fitted to the base of the board and up the sides by 300 mm.
Brake Cable Safety Device.
This safety device is approved for the ceiling suspended goal and imposed by the Standard – I.S. EN 360. Cable Model for high ceilings. Automatic cable winding and unwinding. Braking at 200 mm to protect against impact in the event of goal cable system falling. Fastening by safety snap hook.
Electrical Services Required (provided by others):
Basketball
Motorised Ceiling Basketball goals at each end. The control Key Switches for these units will be in the Store room or the Instructors office and therefore all necessary wiring to be fitted to allow the units to be operated safely Provide 2 off 65 x 65 x 50 mm boxes and associated key operated switches, for connection to the motors provided by the PE equipment Supplier. The switch boxes
should be positioned so that it is possible to observe the operation of both basketball units from the switching position. Provide a four core plus earth cable from the above boxes to roof level for both ceiling mounted units. Each motor for the units has a rating typically not exceeding 250 W. The PE Equipment Supplier to supply a circuit diagram.

Other options.

Alternatively if the design of the hall does not allow Ceiling Basketball units we can provide the PE29 Wall Mount Basketball Goal. Made to meet NL standards the wall unit can be made to fold sideways with a locking system or stored vertically by means of a manual or electrically operated winch. These units start from €1,800 per pair.

 
 
 
 
 
 
 
 

Contact Fitness Functions.

If you need us to call out to your Sports Hall or require additional, basketball sets, basketball rings or backboard information please do not hesitate to contact us.
Email our digital marketing manager;niall@fitnessfunctions.ie We look forward to your email.

, , ,

Aug
08

Top 5 things Irish Schools & Clubs should know when buying Basketball Units

 

Basketball, as one of the fastest growing sports in Ireland requires appropriate facilities. Irish Schools & Sports Centres/Halls over the last 10 years have often approach us for advice on installing basketball goals and units in their sports hall. We believe that the following 5 factors, ultimately, decide what Basketball Goals a sports venue will have.

 

Ceiling mounted basketball Sports Halls

1. Sports Hall Construction.

The  design of your  sports centre  will  decide what basketball  goals are the most adequate for your sports hall. In order for your facility to take a ceiling or roof  mounted  basketball  system you’ll need to have  sufficient steelwork at roof level. For wall  mounted basketball goals you’ll need blockwork capable of taking the load (the wall must be of suitable strength to support a load of 200 kg on a cantilever arm of 4 m extension from the wall at a height of 4 metres.)

Fitness Functions offer a free consultation service to determine your requirements *

2. Competition Level.

This factor plays a critical part in deciding what basketball units will best suit your venue.   Some venues host  national super league or International matches,  but most halls will play to schools competitions and  incorporate  practice goals basketball. Mobile basketball goals, wall or ceiling mounted systems can be provided for each level.

Click to request a brochure.


3. Budget.

As a general rule “Wall” as opposed to “Ceiling” mounted basketball units are the  least expensive solution. The  wall units can be in a fixed  play  position or could be either side or vertically folding to the wall when not in use, to avoid interfering with other activities.

 

4. Age Group

Coming to a decision on what groups and ages will actually be playing determines the  design of the units required. In a junior or national school the ring height would be set to 8′ 6″for players up to 13 years, senior level ring height is 10ft. Our goals can be fixed and made to suit one height. Alternatively, we can make the units with a lifting/lowering device to allow play at both heights.

5.  Manual or electrically operated basketball system.

The decision here relates to the basketball system being either manually operated via a winch system or an electronic system which will raise and lower your units into place. Naturally the manual system is the more economically option but the electronic option is the preferred choice.

Contact Fitness Functions.

If you require need us to call out to your Sports Hall or require additional, basketball sets, basketball rings or backboard information please do not hesitate to contact us, email our marketing manager; niall@fitnessfunctions.ie or visit or website www.fitnessfunctions.ie. We look forward to hearing from you.



, , , , ,

May
09

 

Ceiling & Cross Court Basketball Goals, Co. Mayo & Tipperary

A Customised Investment.

Basketball units, particularly Ceiling mounted basketball goals are usually the most costly fixed sporting element in a sports hall. As the vast majority of Irish sports hall differ in size, shape and dimensions the basketball units will need to be customised to take in the unique features of each venue.

Request Outdoor Brochure (featuring Basketball Units) >>

Our most recent basketball project.

This was exactly the situation for our most recent basketball installations (May 2013) in Co. Mayo & Tipperary. With the proper care these basketball goals will be used and enjoyed by students for years.

Standards & Specifications.

We manufacture & install ceiling mounted & cross court basketball goals to Department of Education Specifications & Standards. We install motorised wall mounted basketball goals complete with Perspex backboards, basketball padding, break cable safety device in sports centres & schools throughout Ireland.

 

Contact Fitness Functions.

If you require us to call out to your Sports Hall or require additional, basketball sets, basketball rings or backboard information please do not hesitate to contact us. Email our digital marketing manager; niall@fitnessfunctions.ie. We look forward to your email.



, , ,

Feb
18

Irish Basketball Backboards